Our mirrors have a 6mm glass face with a silver, tinted or antique mirror backing and with a Class "A" acrylic safety backing with adhesion that increases with age adhered to a 12 mm thick closed cell fire retardant cushioner. Mirror panels can be fitted to brick, block or plasterboard walls and butted together to make large areas either with polished edges or an aluminium T piece to cover the joins.

 

Mirror panels are held in place by the perimeter wood (which surrounds the entire panel or group of panels) with fixings through the surround and with the secondary adhesion of the mirror to the wall. Surrounds are available in Ash, Beech or Oak or alternatively you can use your own material to match any décor. Alternatively mirror panels are held in place by the perimeter aluminium trim (which surrounds the entire panel or group of panels) with fixings through the surround and secondary adhesion of the mirror to the wall. Aluminium surrounds are available in standard polished finish but bronze, brass, gold, pewter or any powder coated colour are available at an extra cost.

 

Where a ballet barre is to be fitted a gap must be left between each glass panel for fixing the brackets. This can either be achieved by one horizontal gap with glass panels above and below (preferred) or several vertical gaps. With timber surrounds all gaps for ballet bar brackets will have a timber section flush with the mirror face.

 

Price per square metre subject to a survey.

 

To order